How to use the ALU-GO pliers

1. With your fingers squeeze together the sheets you would like to attach, keeping the junction points one above the other.
(Bear in mind that you can join a maximum of three sheets at the same time.)

 

 

 

 

 

 

 

 

2. Place the Alu-GO pliers on the junction point.
(If possible, have the side with the hole on the pliers’ head facing you.)
 

 

 

 

 

 

 

 

 

 

 

3. Apply pressure on the Alu-GO pliers.

 

 

 

 

 

 

 

 

 

 

4. Open the Alu-GO pliers while squeezing the plates you would like to join with your fingers.
(Take care not to let the pieces you would like to join slide apart.)

 

 

 

 

 

 

 

 

 

5. Turn the pliers by inserting their piercing point into the hole of the joining point on the opposite side.

 

 

 

 

 

 

 

 

 

 

6. Squeeze the Alu-GO pliers completely together.

 

 

 

 

 

 

 

 

 

 

7. Open the pliers and take the joined sheets off it.
(If you did everything correctly, the sheets should be permanently joined as if riveted together through their holes. If you used less force during the operation described in 6., the pieces can be rotated around the junction point. If you attach the sheets at several points instead of just one, they will be joined together more strongly.)